RDM EC7000i Guide d'installation télécharger pdf (Page 22)

Maintaining the EC6000i, EC7000i, or EC7500i

The EC6000i, EC7000i, or EC7500i performs best when all working surfaces are clean and free of foreign

material.

Cleaning the Scanner

• To clean the outside cabinetry: Use a damp cloth and mild soap.

• To clean the inside of the unit:

1. Press the latch and lift the cover to access the imaging frame.

2. Lift the imaging frame to access the document feed plate.

3. Locate the blue tab on the side of the unit. With your thumb

positioned on the outside of the unit, apply enough pressure to pull

the blue tab towards the outside of the unit and hold it there.

4. While holding the blue tab, lift the document feed plate up and to

the left or up and from the right to free it from the opposite side.

5. Remove the plate.

6. Ensure that the black fingers on the baffle move freely (EC7000i

only).

7. Use a dusting brush designed for use on electronic equipment, or

use a compressed air duster to remove dust or debris.

CAUTION:

• Always disconnect the power to the scanner before cleaning it.

• Solvents or harsh cleaners may damage or discolor the cabinetry.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

Pas de commentaire

RDM EC7000i Guide d'installation Page 22